1 www.fairchildsemi.com ?2005 fairchild semiconductor corporation fqp11n50cf/FQPF11N50CF rev. c0 fqp11n50cf/FQPF11N50CF n-channel mosfet absolute maximum ratings * drain current limited by maximum junction temperature thermal characteristics to-220 g sd to-220f g s d { { { { { { { { { { { { ? ?? ? { { { { { { { { { { { { ? ?? ? s d g symbol parameter fqp11n50cf FQPF11N50CF unit v dss drain-source voltage 500 v i d drain current - continuous (t c = 25c) 11 11 * a - continuous (t c = 100c) 7 7 * a i dm drain current - pulsed (note 1) 44 44 * a v gss gate-source voltage 30 v e as single pulsed avalanche energy (note 2) 670 mj i ar avalanche current (note 1) 11 a e ar repetitive avalanche energy (note 1) 19.5 mj dv/dt peak diode recovery dv/dt (note 3) 4.5 v/ns p d power dissipation (t c = 25c) 195 48 w - derate above 25c 1.56 0.39 w/c t j , t stg operating and storage temperature range -55 to +150 c t l maximum lead temperature for soldering purposes, 1/8 " from case for 5 seconds 300 c symbol parameter fqp11n50cf FQPF11N50CF unit r jc thermal resistance, junction-to-case 0.64 2.58 c / w r js thermal resistance, case-to-sink typ. 0.5 -- c / w r ja thermal resistance, junction-to-ambient 62.5 62.5 c / w ? ? ? 100% a valanche tested ? ? fast recovery body diode (typ. 90 ns) this n-channel enhancement mode power mosfet is produced using fairchild semiconductor ? s proprietary planar stripe and dmos technology. this advanced mosfet technology has been especially tailored to reduce on-state resistance, and to provide superior switching performance and high avalanche energy strength. these devices are suitable for switched mode power supplies, active power factor correction (pfc), and electronic lamp ballasts. march 2013 fqp11n50cf / FQPF11N50CF n-channel qfet ? frfet ? mosfet 500 v, 11 a, 550 m? description features 11 a, 500 v, r ds(on) = 550 m(max.) @v gs = 10 v, i d = 5.5 a low gate charge (typ. 43 nc) low c rss (typ. 20 pf)
2 fqp11n50cf/FQPF11N50CF n-channel mosfet package marking and ordering information electrical characteristics t c = 25c unless otherwise noted notes: 1. repetitive rating : pulse width limited by maximum junction temperature 2. l = 10 mh, i as = 11 a, v dd = 50v , r g = 25 ? , starting t j = 25c 3. i sd 11 a, di/dt 200 a/ s, v dd bv dss, starting t j = 25c 4. pulse test : p ulse widt h 300 s, duty cycle 2% 5. essentially independent of operating temperature device marking device package reel size tape width quantity fqp11n50cf fqp11n50cf to-220 -- -- 50 FQPF11N50CF FQPF11N50CF to-220f -- -- 50 symbol parameter test conditions min. typ. max. unit off characteristics bv dss drain-source breakdown voltage v gs = 0 v, i d = 250 a 500 -- -- v ? bv dss / ? t j breakdown voltage temperature coefficient i d = 250 a, referenced to 25c -- 0.5 -- v/c i dss zero gate voltage drain current v ds = 500 v, v gs = 0 v -- -- 10 a v ds = 400 v, t c = 125c -- -- 100 a i gssf gate-body leakage current, forward v gs = 30 v, v ds = 0 v -- -- 100 na i gssr gate-body leakage current, reverse v gs = -30 v, v ds = 0 v -- -- -100 na on characteristics v gs(th) gate threshold voltage v ds = v gs , i d = 250 a2 . 0- -4 . 0v r ds(on) static drain-source on-resistance v gs = 10 v, i d = 5.5 a -- 0.48 0.55 ? g fs forward transconductance v ds = 40 v, i d = 5.5 a (note 4) -- 15 -- s dynamic characteristics c iss input capacitance v ds = 25 v, v gs = 0 v, f = 1.0 mhz -- 1515 2055 pf c oss output capacitance -- 185 235 pf c rss reverse transfer capacitance -- 25 30 pf switching characteristics t d(on) turn-on delay time v dd = 250 v, i d = 11 a, r g = 25 ? (note 4, 5) -- 24 57 ns t r turn-on rise time -- 70 150 ns t d(off) turn-off delay time -- 120 250 ns t f turn-off fall time -- 75 160 ns q g total gate charge v ds = 400 v, i d = 11 a, v gs = 10 v (note 4, 5) -- 43 55 nc q gs gate-source charge -- 8 -- nc q gd gate-drain charge -- 19 -- nc drain-source diode characteristics and maximum ratings i s maximum continuous drain-source diode forward current -- -- 11 a i sm maximum pulsed drain-source diode forward current -- -- 44 a v sd drain-source diode forward voltage v gs = 0 v, i s = 11 a -- -- 1.4 v t rr reverse recovery time v gs = 0 v, i s = 11 a, di f / dt = 100 a/ s (note 4) -- 90 -- ns q rr reverse recovery charge -- 1.5 -- c www.fairchildsemi.com ?2005 fairchild semiconductor corporation fqp11n50cf/FQPF11N50CF rev. c0
3 fqp11n50cf/FQPF11N50CF n-channel mosfet typical performance characteristics figure 1. on-region characteristics figure 2. transfer characteristics figure 3. on-resistance variation vs. figure 4. body diode forward voltage drain current and gate voltage variation vs. source current and temperatue figure 5. capacitance characteristics figure 6. gate charge characteristics 10 -1 10 0 10 1 10 -1 10 0 10 1 v gs top : 15.0 v 10.0 v 8.0 v 7.0 v 6.5 v 6.0 v 5.5 v bottom : 4.5 v * notes : 1. 250 s pulse test 2. t c = 25 c i d , drain current [a] v ds , drain-source voltage [v] 2 4 6 8 10 12 10 0 10 1 150 c 25 c -55 c * notes : 1. v ds = 40v 2. 250 s pulse test i d , drain current [a] v gs , gate-source voltage [v] 0 5 10 15 20 25 30 35 40 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 v gs = 20v v gs = 10v * note : t j = 25 c r ds(on) [ ? ], drain-source on-resistance i d , drain current [a] 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 10 -1 10 0 10 1 25 c 150 c * notes : 1. v gs = 0v 2. 250 s pulse test i dr , reverse drain current [a] v sd , source-drain voltage [v] 10 -1 10 0 10 1 0 1000 2000 3000 4000 c iss = c gs + c gd (c ds = shorted) c oss = c ds + c gd c rss = c gd * note ; 1. v gs = 0 v 2. f = 1 mhz c rss c oss c iss capacitances [pf] v ds , drain-source voltage [v] 0 1 02 03 04 05 0 0 2 4 6 8 10 12 v ds = 250v v ds = 100v v ds = 400v * note : i d = 11a v gs , gate-source voltage [v] q g , total gate charge [nc] www.fairchildsemi.com ?2005 fairchild semiconductor corporation fqp11n50cf/FQPF11N50CF rev. c0
4 fqp11n50cf/FQPF11N50CF n-channel mosfet typical performance characteristics (continued) figure 7. breakdown voltage variation figure 8. on-resistance variation vs. temperature vs. temperature figure 9-1. maximum safe operating area figure 9-2. maximum safe operating area for fqp11n50cf for FQPF11N50CF figure 10. maximum drain current vs. case temperature -100 -50 0 50 100 150 200 0.8 0.9 1.0 1.1 1.2 * notes : 1. v gs = 0 v 2 . i d = 250 a bv dss , (normalized) drain-source breakdown voltage t j , junction temperature [ c] -100 -50 0 50 100 150 200 0.0 0.5 1.0 1.5 2.0 2.5 3.0 * notes : 1 . v gs = 10 v 2 . i d = 5.5 a r ds(on) , (normalized) drain-source on-resistance t j , junction temperature [ o c] 10 0 10 1 10 2 10 3 10 -2 10 -1 10 0 10 1 10 2 100 ms 1 ms 10 s dc 10 ms 100 s operation in this area is limited by r ds(on) * notes : 1 . t c = 25 o c 2 . t j = 150 o c 3. single pulse i d , drain current [a] v ds , drain-source voltage [v] 10 0 10 1 10 2 10 3 10 -2 10 -1 10 0 10 1 10 2 100 ms 1 ms 10 s dc 10 ms 100 s operation in this area is limited by r ds(on) * notes : 1 . t c = 25 o c 2 . t j = 150 o c 3 . single pulse i d , drain current [a] v ds , drain-source voltage [v] 25 50 75 100 125 150 0 2 4 6 8 10 12 i d , drain current [a] t j , junction temperature [ o c] www.fairchildsemi.com ?2005 fairchild semiconductor corporation fqp11n50cf/FQPF11N50CF rev. c0
5 fqp11n50cf/FQPF11N50CF n-channel mosfet typical performance characteristics (continued) figure 11-1. transient thermal response curve for fqp11n50cf figure 11-2. transient thermal response curve for FQPF11N50CF 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 -2 10 -1 10 0 * notes : 1 . z jc (t) = 0.64 o c/w max. 2 . d uty f a ctor, d = t 1 /t 2 3 . t jm - t c = p dm * z jc (t) single pulse d=0.5 0.02 0.2 0.05 0.1 0.01 z jc (t), thermal response t 1 , s quare w ave p ulse d uration [sec] t 1 p dm t 2 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 -2 10 -1 10 0 * n otes : 1 . z jc (t) = 2.58 o c/w max. 2 . d u ty f a cto r, d = t 1 /t 2 3 . t jm - t c = p dm * z jc (t) single pulse d=0.5 0.02 0.2 0.05 0.1 0.01 z jc (t), thermal response t 1 , s q u are w a ve p u lse d ura tion [sec] t 1 p dm t 2 www.fairchildsemi.com ?2005 fairchild semiconductor corporation fqp11n50cf/FQPF11N50CF rev. c0
6 fqp11n50cf/FQPF11N50CF n-channel mosfet gate charge test circuit & waveform resistive switching test circuit & waveforms unclamped inductive switching test circuit & waveforms charge v gs 10v q g q gs q gd 3ma v gs dut v ds 300nf 50k 200nf 12v same type as dut charge v gs 10v q g q gs q gd 3ma v gs dut v ds 300nf 50k 200nf 12v same type as dut v gs v ds 10% 90% t d( on) t r t on t off t d(off) t f v dd 10v v ds r l dut r g v gs v gs v ds 10% 90% t d( on) t r t on t off t d(off) t f v dd 10v v ds r l dut r g v gs e as =li as 2 ---- 2 1 -------------------- bv dss -v dd bv dss v dd v ds bv dss t p v dd i as v ds (t) i d (t) time 10v dut r g l i d t p e as =li as 2 ---- 2 1 e as =li as 2 ---- 2 1 ---- 2 1 -------------------- bv dss -v dd bv dss v dd v ds bv dss t p v dd i as v ds (t) i d (t) time 10v dut r g l l i d i d t p www.fairchildsemi.com ?2005 fairchild semiconductor corporation fqp11n50cf/FQPF11N50CF rev. c0
7 fqp11n50cf/FQPF11N50CF n-channel mosfet peak diode recovery dv/dt test circuit & waveforms dut v ds + _ driver r g same type as dut v gs ? dv/dt controlled by r g ?i sd controlled by pulse period v dd l i sd 10v v gs ( driver ) i sd ( dut ) v ds ( dut ) v dd body diode forward voltage drop v sd i fm , body diode forward current body diode reverse current i rm body diode recovery dv/dt di/dt d = gate pulse width gate pulse period -------------------------- dut v ds + _ driver r g same type as dut v gs ? dv/dt controlled by r g ?i sd controlled by pulse period v dd l l i sd 10v v gs ( driver ) i sd ( dut ) v ds ( dut ) v dd body diode forward voltage drop v sd i fm , body diode forward current body diode reverse current i rm body diode recovery dv/dt di/dt d = gate pulse width gate pulse period -------------------------- d = gate pulse width gate pulse period -------------------------- www.fairchildsemi.com ?2005 fairchild semiconductor corporation fqp11n50cf/FQPF11N50CF rev. c0
8 fqp11n50cf/FQPF11N50CF n-channel mosfet dimensions in millimeters mechanical dimensions to-220 www.fairchildsemi.com ?2005 fairchild semiconductor corporation fqp11n50cf/FQPF11N50CF rev. c0
9 fqp11n50cf/FQPF11N50CF n-channel mosfet mechanical dimensions dimensions in millimeters to-220f www.fairchildsemi.com ?2005 fairchild semiconductor corporation fqp11n50cf/FQPF11N50CF rev. c0
10 fqp11n50cf/FQPF11N50CF n-channel mosfet trademarks the following includes registered and unregistered trademarks and service marks, owned by fairchild semiconductor and/or its gl obal subsidiaries, and is not intended to be an exhaustive list of all such trademarks. *trademarks of system general corporation, used under license by fairchild semiconductor. disclaimer fairchild semiconductor reserves the right to make changes with out further notice to any products herein to improve reliability, function, or design. fairchild does not assume any liability arising out of th e application or use of any product or circuit described herein; neither does it convey an y license under its patent rights, nor the rights of others. these specifications do not expand the terms of fairchild?s wo rldwide terms and conditions , specifically the warranty therein, which covers these products. life support policy fairchild?s products are not authorized fo r use as critical components in life support devices or systems without the express written approval of fairchild semiconductor corporation. as used here in: 1. life support devices or systems ar e devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a sign ificant injury of the user. 2. a critical component in any com ponent of a life su pport, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. product status definitions definition of terms 2cool? accupower? ax-cap ? * bitsic? build it now? coreplus? corepower? crossvolt ? ctl? current transfer logic? deuxpeed ? dual cool? ecospark ? efficentmax? esbc? fairchild ? fairchild semiconductor ? fact quiet series? fact ? fast ? fastvcore? fetbench? fps? f-pfs? frfet ? global power resource sm green bridge? green fps? green fps? e-series? g max ? gto? intellimax? isoplanar? marking small speakers sound louder and better? megabuck? microcoupler? microfet? micropak? micropak2? millerdrive? motionmax? mwsaver? optohit? optologic ? optoplanar ? powertrench ? powerxs? programmable active droop? qfet ? qs? quiet series? rapidconfigure? saving our world, 1mw/w/kw at a time? signalwise? smartmax? smart start? solutions for your success? spm ? stealth? superfet ? supersot?-3 supersot?-6 supersot?-8 supremos ? syncfet? sync-lock? ?* tinyboost? tinybuck? tinycalc? tinylogic ? tinyopto? tinypower? tinypwm? tinywire? transic ? trifault detect? truecurrent ? * serdes? uhc ? ultra frfet? unifet? vcx? visualmax? voltageplus? xs? ? ? datasheet identification product status definition advance information for mative / in design datasheet contains the design specifications for product development. specifications may change in any manner without notice. preliminary first production datasheet contains preliminary data; supplementary data will be published at a later date. fairchild semiconductor reserves the ri ght to make changes at any time without notice to improve design. no identification needed full production datasheet contains final specifications. fair child semiconductor re serves the right to make changes at any time without notice to improve the design. obsolete not in production datasheet contains specifications on a product t hat is discontinued by fairchild semiconductor. the datasheet is for reference information only. anti-counterfeiting policy fairchild semiconductor corporation?s anti-c ounterfeiting policy. fairchild?s anti-count erfeiting policy is also stated on our external website, www.fairchildsemi.com, under sales support . counterfeiting of semiconductor parts is a growing problem in the industry. all manuf actures of semiconductor products are expe riencing counterfeiting of their parts. customers who inadv ertently purchase counterfeit parts experience many problems such as loss of brand reputation, substa ndard performance, failed application, and increased cost of producti on and manufacturing delays. fairchild is taki ng strong measures to protect ourselve s and our customers from the proliferation of counterfeit parts. fairchild strongly encourages customers to purchase fairchild parts either directly from fa irchild or from authorized fairchild distributors who are listed by country on our web page cited above. product s customers buy either from fairchild directly or fr om authorized fairchild distributors are genuine parts, have full traceability, meet fairchild?s quality standards for handing and storage and provide access to fairchild?s full range of up-to-date technical and product information. fairchild and our authorized distributors will stand behind all warranties and wi ll appropriately address and warranty issues that may arise. fairchil d will not provide any warranty coverage or other assistance for pa rts bought from unau thorized sources. fairchild is committed to combat this global problem and encourage our customer s to do their part in stopping th is practice by buying direct or from authorized distributors. rev. i64 ? www.fairchildsemi.com ?2005 fairchild semiconductor corporation fqp11n50cf/FQPF11N50CF rev. c0
|
